cosmic

Guys, thanks a lot for your help, i put all the suggestion into our incident db. The problem seems to be fixed now. For some reason, after restoring full vm using CV, configmgr had assigned ip from dhcp and the only network 'manual entry' was the gateway one. bit strange, also the original NIC was hidden. once again, thanks!

OK, thanks guys for the suggestions. am i loosing anything if i follow your steps? i assume sccm/wsus should see all the updates and SUGs?

Hi guys, We had some major issue with our configmanager so decided to restore the whole VM from a backup. Once all been restored, under Component Status I've noticed one Critical Status for SMS_WSUS_SYNC_MANAGER: - Message ID: - Description: WSUS Synchronization failed. Message: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to . Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS. From Event Viewer also getting Error -Event 10022 (The last catalog synchronization attempt was unsuccessful.) can someone please advice of what can be wrong? regards, Matt

Hi guys, everytime i am synchrinizing updates getting the 'error' from wsyncmgr.log:, the delete task kicks off every hour but fails, is ther an easy fix for that? Done synchronizing SMS with WSUS Server 123 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:30 PM 6684 (0x1A1C) Set content version of update source {552026FF-0CD5-488F-BD12-AE2F1A0372D8} for site RW2 to 171 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) STATMSG: ID=6702 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=123 SITE=RW2 PID=2956 TID=6100 GMTDATE=Wed Aug 19 10:11:31.166 2015 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) Sync succeeded. Setting sync alert to canceled state on site RW2 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) Updated 2018 items in SMS database, new update source content version is 171 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) Sync time: 0d01h26m03s SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) Deleting old expired updates... SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:31 PM 6100 (0x17D4) Deleted 17 expired updates SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:36 PM 6100 (0x17D4) Deleted 420 expired updates SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:46 PM 6100 (0x17D4) Deleted 430 expired updates SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:47 PM 6100 (0x17D4) Deleted 430 expired updates total SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:47 PM 6100 (0x17D4) Deleting file \\?\UNC\servername\Client\x64\client.msi, FAILED, Win32 Error = 5 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:48 PM 6100 (0x17D4) Failed to delete orphaned content folder \\servername\Client\x64, error 0x5 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:48 PM 6100 (0x17D4) Deleting file \\?\UNC\servername\Client\i386\client.msi, FAILED, Win32 Error = 5 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:48 PM 6100 (0x17D4) Failed to delete orphaned content folder \\servername\Client\i386, error 0x5 SMS_WSUS_SYNC_MANAGER 19/08/2015 8:11:48 PM 6100 (0x17D4) Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER 19/08/2015 9:11:31 PM 6100 (0x17D4) Deleting file \\?\UNC\servername\Client\x64\client.msi, FAILED, Win32 Error = 5 SMS_WSUS_SYNC_MANAGER 19/08/2015 9:11:36 PM 6100 (0x17D4) Failed to delete orphaned content folder \\servername\Client\x64, error 0x5 SMS_WSUS_SYNC_MANAGER 19/08/2015 9:11:36 PM 6100 (0x17D4) Deleting file \\?\UNC\servername\Client\i386\client.msi, FAILED, Win32 Error = 5 SMS_WSUS_SYNC_MANAGER 19/08/2015 9:11:36 PM 6100 (0x17D4) Failed to delete orphaned content folder \\servername\Client\i386, error 0x5 SMS_WSUS_SYNC_MANAGER 19/08/2015 9:11:36 PM 6100 (0x17D4)

Hi guys, on MVLS portal, under 'System Center 2012 R2 Config Mgr Client Mgmt License with Service Pack 1' I can see a few iso files. could someone clarify which one should be used for the upgrade ? System Center 2012 Configuration Manager and Endpoint Protection With Service Pack 2 Multilanguage 32/64 bit 1158 MB ISO System Center 2012 R2 Configuration Manager Client Management License With Service Pack 1 Multilanguage 32/64 bit 5 MB ISO Thanks a lot, Matt

Great! Thanks a lot.

Hi guys, Planning to upgrade our configmgr to 2012r2SP1 but first wanted to check with you what's the minimum supported SQL version, currently running 2008 R2 SP1 CU9, any help please? thanks, MW

would it work the same way on sccm 2012r2? thanks

Hi All, environment: SCCM 2012R2 / SQL 2008R2 Could someone please advise re solving the problem? Just followed all the steps to apply CU4 for ConfigManager/SQL but when it comes to updating SQL i’m getting following errors: Msg 2812, Level 16, State 62, Line 1 Could not find stored procedure ‘k’. Msg 207, Level 16, State 1, Procedure spAddRecoveryTrackingRecord, Line 41 Invalid column name ‘TransportType’. Msg 207, Level 16, State 1, Procedure spAddRecoveryTrackingRecord, Line 46 Invalid column name ‘TransportType’. Msg 207, Level 16, State 1, Procedure spAddRecoveryTrackingRecord, Line 49 Invalid column name ‘TransportType’. (0 row(s) affected) Msg 208, Level 16, State 6, Procedure v_ContentDistributionReport_G, Line 2 Invalid object name ‘v_ContentDistributionReport_G’. (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (0 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (0 row(s) affected) etc.etc Thanks for any suggestions.

just want to add that deploying the .msi from Firmware upgrade as an application also works fine

Hope it will help ... What was done: Extracted the driver pack and put the PS script on top: see borrowed picture (thanks for that) http://goo.gl/1JiZ41 then ... Made a package ... Package properties: Data Source tab: This package contains source files \\sccm\sources\... ​Created program with following settings: General tab:- Command line: Powershell.exe -executionpolicy Bypass -file .\InstallDrivers.ps1 - Run: Normal - After Running: No action Environment tab: - Program can run: Only when a user is logged on; - Run Mode: Run with administrative rights; - Ticked: Allow users to interact with this program; - Drive mode: Runs with UNC name; Advanced tab:- Run once for the computer; - Ticked: Suppress program notifications; Distributed Content into DPs; Deployed to existing test collection; Deployment settings: - Action:Install; - Purpose: Available; PowerShell: $ScriptPath = Split-Path -parent $MyInvocation.MyCommand.Definition $files = get-childitem -path $Scriptpath -recurse -filter *.inf foreach ($file in $files) { Write-host "Injecting driver $file" C:\Windows\Sysnative\pnputil.exe -i -a $file.FullName } Write-Host "Press Enter to continue" read-host Also, under Administration -> Client Settings -> Computer Agent: set PowerShell execution Policy to: Bypass

Great, works like a charm! thanks a lot!

Hi, thanks for the hint, does it mean that the ps should look like the one below:? $ScriptPath = Split-Path -parent $MyInvocation.MyCommand.Definition $files = get-childitem -path $Scriptpath -recurse -filter *.inf foreach ($file in $files) { Write-host "Injecting driver $file" C:\Windows\System32\pnputil.exe -i -a $file.FullName } Write-Host "Press Enter to continue" read-host

can someone pls help me with updating firmware/drivers on already deployed SP3s? i followed the instructions from http://blogs.technet.com/b/deploymentguys/archive/2013/05/16/deploying-drivers-and-firmware-to-surface-pro.aspx#pi36647=2 What i've done so far in SCCM 2012r2 is: * I made a package Package properties Data Source tab: -This package contains source files \\sccm\sources\... * Then created program with following settings: General tab: - Command line: Powershell.exe -executionpolicy Bypass -file .\InstallDrivers.ps1 - Run: Normal - After Running: no action Environment tab: - Program can run: Only when a user is logged on; - Run Mode: Run with administrative rights; - Ticked: Allow users to interact with this program; - Drive mode: Runs with UNC name; Advanced tab: - Run once for the computer - Ticked: Suppress program notifications * Distributed Content into DP; * Deployed to existing test collection; * Deployment settings: Action:Install; Purpose: Available When i run it from Software Centre on the client i'm getting following errors: Injecting driver HDXMSSExtDsp.inf pnputil : The term 'pnputil' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At C:\windows\ccmcache\4\InstallDrivers.ps1:11 char:5 + pnputil -i -a $file.FullName + ~~~~~~~ + CategoryInfo : ObjectNotFound: (pnputil:String) [], CommandNotF oundException + FullyQualifiedErrorId : CommandNotFoundException Injecting driver RtsUStor.inf pnputil : The term 'pnputil' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At C:\windows\ccmcache\4\InstallDrivers.ps1:11 char:5 + pnputil -i -a $file.FullName + ~~~~~~~ + CategoryInfo : ObjectNotFound: (pnputil:String) [], CommandNotF oundException + FullyQualifiedErrorId : CommandNotFoundException Press Enter to continue BTW, if i run it manually on SP3 -outside SCCM all is running seamlessly. could you please give me a hint what im doing wrong? Thanks

Hi RacquelVigil we have a mix of SP3: i7-4650U CPU @ 1.7GHz 2.3Ghz; 8GB RAM; 512 GB SDD; x50 devices & i5-4300U CPU @ 1.9 GHz 2.50GHz; 8GB RAM; 256 GB SDD; x500 devices