Jump to content


senseless

Established Members
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

Everything posted by senseless

  1. senseless
    Remember if your OSD TS won't work correctly after you've added or changed something it will be better to create bare new one. After I created new OSD TS my unattended XML finally fully applied, there was a problem with Language for non-unicode programs, that part just won't change for some reason. And after I created bare new OSD TS my SCCM Client also got out of the provisioning mode.
  2. senseless
    danubex
  3. senseless
    Hi, thanks for the reply. Okay, thats the answer why last software TS didn't work. Thanks! Hmmm. The sympthoms are the same as in your link. The registry value was set to "true" for some reason! Could it be because of I pressed a restart button till the end of countdown? I've changed that value back to 30 from 5 seconds, cause I didn't think its important at the end. Do I need to create an additional TS with restart?
  4. senseless
    Why do you need japaneese boot image? It's just different language, or I'm wrong? What is the error code?
  5. senseless
    OS is Windows 7 Enterprise x64, recreated SCCM Client installation package and added it to the task sequence, but it didn't help. SCCM Client just won't install itself. It should apply policy and install an antivirus software remotely but it didn't happen. I don't understand why do I need to install SCCM ConfigManager Client during OSD if after adding a machine to domain it will be automatically installed. Which logfile I should check first? Any ideas?
  6. senseless
    manuverma Your question still actual?
  7. senseless
    Oh, come on... Any advice? Maybe I should create another package from definition for another Task Sequence instead of using one package for 2 task sequences?
  8. senseless
    Hello, everybody! We had a task sequence for x86 systems, I've dupliceted it and changed it to Winx64 by changing all that I need, except a part "Install or Upgrade ConfigManager Client 4.0". That package was made in 2009 and worked fine so I've decided to use it in my OSD too.(Anyway it should contain both x86 and x64 versions, right?) Everything was great till I've realised that SCCM Client wont work properly after computer added to domain. OSD installation succeeded, sccm client installation succeeded everything is succeeded but the ConfigManager Client wont work properly. Where should I search the problem? I don't understand why do I need to install SCCM ConfigManager Client during OSD if after adding a machine to domain it will be automatically installed. Thanks!
  9. senseless
    Check the DiskPart part in your OSD TaskSequence first because it's first error in the log.
  10. senseless
    "Account currently disabled" - Ain't it the reason of the problem?
  11. senseless
    Finally, I've managed with 3D DriveGuard and FingerPrint Sensor driver. If somebody need an advice or something I would gladly help.
  12. senseless
    Hmmm, Everything is fine, but I need to make all the options different. Format for example English Location Italy Language for Non Unicode programs to Spain for example. And the keyboard language is not necessary to change. Parameter "UserLocale" changes both Format and Location options. I need to make the location different from Format.
  13. senseless
    Got it finnaly. http://www.windows-noob.com/forums/index.php?/topic/1660-customising-windows-7-deployments-part-1/
  14. senseless
    Hi everybody! In our company we have an OS image with 2 languages. During deploying OS it asks which language I would like o use. Every option I need is right except the Language for non-Unicode programs - it's always by default English. I need it to be always Russian for both languages. How can I made it? Help.
  15. senseless
    After I've made a new image and captured it from the virtual machine it is successfully applied to those notebooks. I think that it will be OK with new ones, even if I didn't test them. There's another issue with OS parameters after image the is applied but it is not so important as the previous problem. Thanks for the advice anyway.
  16. senseless
    Still no luck. Disabled all the Realtek network drivers, added Driver Package with the drivers only for the specific model. And I'm getting the same BSOD. After notebook is installing drivers BSOD appears on the 99% of the drivers installation. Maybe there's a problem with the image?But what kind of problem could be if after sysprep all the drivers are being deleted? Because an old image is ok for any model, new one was created from one of the notebooks, captured and added to SCCM. Still can't get what am I doing wrong...
  17. senseless
    After new notebook models appeared I've added few network drivers from the original CD. A good idea about the new drivers. I've just disabled an old ones, If it doesn't help I'll try to disable the new ones and enable the old. Of course you are right. After moving to SCCM 2012 we should rebuild the logical structure OSD works. Make few packages, and assign them to specific model. Each model is a specific package.
  18. senseless
    Yes, we are using a pool of drivers and few packages that were made as a pack of the Fujitsu, Lan and Lenovo notebooks that weren't made by me. All that stuff wasn't made totally be me, now I'm trying to figure out the best way to make all the new and old notebooks work fine. After migration to SCCM 2012 we will probably change the way driver packs are categorized. But I'm still don't understand why the the old image that was created few years ago and with updated software works fine on all the notebooks models? Thats the next step I would try, there aren't so much Realtek drivers added.
  19. senseless
    The problem only with 2 models Fujitsu A530 with Intel HD Graphics and Fujitsu SH531/GFX with 2 videocards Intel HD and Nvidia, but as far as I remember all threads about ndis.sys were with suggestions that the problem is with the network driver. On both notebooks I've disabled Wi-Fi adapters but it didn't help. So the problem could be in network driver. But which one, there's a lot of them? I'll try to update Intel HD video to a newest ones, and maybe Nvidia but later.
  20. senseless
    Hello everybody! We have few models of notebooks in our organization. I've made a new image. Installed on one of the notebooks an OS with all software and registry keys need, Captured an image and successfully applied it into SCCM, after adding some drivers I started to use it. New notebooks models works fine with it and some of the old ones too, but few models after applying drivers at the last stage just showing BSOD 0x000000D1 problem with ndis.sys file . There's no dmp file created if I'll reboot a notebook and it won't load . After booting it says that the installation was interrupted please reboot and start it again. If I'll restore the previous image the OSD works fine! But the image was syspreped 3 times and there's no way I can update it. I couldn't find any info about ndis.sys it doesn't gives me any info about the driver that causes BSOD. Any ideas I can figure it out? On the task sequence I've tried to change driver installation options to install only best matched compatible drivers tried to check llimit driver matching to only consider drivers in selected categories , unchecked Do unattended installation of unsigned drivers and so on. I have an Acronis file of nonsyspreped image. I've checked smsts.logs it contains some errors but there's no any useful info as I think. Few logs are in attachment. Help. Thanks. dism.log smsts.log smsts-20130910-232440.log
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.