khloro

Thanks Config Mangler all i did was add a step to add to domain after drivers are applied simple solution thanks!

Even thou the OS installs It doesn't Join the Domain using my AD Admin creds. A simple task sequence of installing Office 2016 never makes it to the PC as well. Task Sequence smsts.log

I found the issue I looked at smspxe.log i had duplicate SMSBIO and MAC address. I deleted the PC/Laptop from sccm and BAM. SCCM then created a new entry for PC/Laptop

Hello All, I was able to image a week ago after we upgraded to 1702 when i boot via pxe either usb or not my task sequence are not showing up. When i boot i receive the error on said machine Failed to run Task Sequence. I do select the Task Sequence and make it available for config manager clients media and pxe. I try with selecting a specify schedule and with out it. I have also create a new task sequence and same issue. I deployed the Task sequence to a collection call Build Capture and also to the Collection unknown. PS purpose Available also

No errors in Tasksequenceprovider

Hi all need some guidance i have create a task sequence in SCCM console in the task sequence but its not showing up. I am unaware what log file to look at. This is a new install not an upgrade SQL 2016.

I have a question how soon should a Task sequence be available and showing when booting via PXE? we talking about 5 to 10 min hour? How can I make it be available quicker? if possible? I find myself waiting a hour or so. Sometimes i bounce the VM and it helps. I have built lab @ home and it did not take this long. I believe my VM is lacking horsepower.

To overcome this 3 Sysprep time limitaiton, following are the walkaround: Open regedit and look for: HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\CleanupState\ Set to value: 2 HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\ Set to value: 7 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion \SoftwareProtectionPlatform\SkipRearm Set to value: 1 Then, run the command: msdtc -uninstall (wait a few seconds) msdtc -install (wait a few seconds) Then, reboot the system and try to run sysprep again. It is working to me. Good luck to you. https://demagnum.wordpress.com/2015/01/08/task-sequence-image-capture-wizard-has-failed-with-the-error-code-0x00004005/

So i disable Auto pull DP from the DP and re distributed content and its downloading it WTH

Hello, I have an issue as one of my driver package is not being copied over to my DP. PkgXfermgr.log I believe this is the issue. I have restart bits and smshost services. PullDP Query Result failed. Failure count = 12/30, Restart time = 6/21/2016 3:46:01 PM Eastern Daylight Time

Yes i did check on the laptop and no its not present. I also get that same error on another machine. Firewall is off as well

Hello, This is a new installed SCCM2012 and when pushing out the client to a machine i receive this error. Attached is my CCM.log file. I am going to Devices all Devices find the PC right click then install Client Execute query exec [sp_CP_SetLastErrorCode] 2097152255, 120 SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) ---> Skipped request "2097152255", machine name "BDMIALT0151". SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) Deleted request "2097152255", machine name "BDMIALT0151" SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152255, 3 SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) Execute query exec [sp_CP_SetLatest] 2097152255, N'05/04/2016 21:00:44', 10 SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) <======End request: "2097152255", machine name: "BDMIALT0151". SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:00:44 PM 6884 (0x1AE4) Getting a new request from queue "Retry" after 100 millisecond delay. SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:03:38 PM 3384 (0x0D38) Sleeping for 60 minutes for queue "Retry". SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:03:38 PM 3384 (0x0D38) Sleeping for 1 seconds... SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:05:38 PM 2848 (0x0B20) CCR count in queue "Retry" is 0. SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:05:39 PM 2848 (0x0B20) Sleeping for 622 seconds... SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:05:39 PM 2848 (0x0B20) Thread has been inactive too long. Closing thread SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:10:43 PM 6884 (0x1AE4) --- This thread is terminating due to inactivity SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:10:43 PM 6884 (0x1AE4) ----- Terminated CCR processing thread. There are now 0 processing threads SMS_CLIENT_CONFIG_MANAGER 5/4/2016 5:10:43 PM 6884 (0x1AE4) ccm.log

Thank you Due to this website I am the Jr Admin for SCCM. Thank you all

Hello All, I have a question long story short I will be losing our SCCM server. I am building a new SCCM server once built how do i get my new sccm to : 1. Change the SCCM Client on the local machine to point to my SCCM w/ its new site code? 2. Should i run a VB or powershell script? 3. Have SCCM server push out the new Client? Will it auto uninstall the local client on my pc/laptops? Thanks

Hello, How do i create a report on a Package I deployed. Example i deployed Package X and want to see which PC's did get the package and did not.

Sorry if i did not express myself well. When i am in Software Lib-task sequence - custom sequence I am unable to add applications i just created. I followed these directions http://gerryhampsoncm.blogspot.com/2013/03/sccm-2012-sp1-step-by-step-guide-part_20.html Found the issue Allow this application to be installed from the install application task sequence ...Needed to wait .

My question is why can i not add any of the other citrix applications? I figured out the error why it not install because i had to select download content This error Was fixed with But still cant figure out why the applications i have created only one shows

ok not solved damit still only see one package as stated what am i missing?

The one thing i noticed so i have created other citrix deployments but when i try to add it to the task sequence to install the app i only see one type of deployment. Also here is what i followed to created a deployment using an exe http://gerryhampsoncm.blogspot.com/2013/03/sccm-2012-sp1-step-by-step-guide-part_20.html I don't see example CitrixTax2 HA! Never Mind! Found it! not sure how it got that path \\ad\Sources\taskcitrixreciever_files\Content_1605b2bb-971e-4aea-b4cd-f156e5215222 should be \\ad\sources\citrix Will update

+++ Did not detect app deployment type Citrix XenApp Plugin for Hosted Apps - Windows Installer (*.msi file)(ScopeId_EA8258B6-64BB-4FC7-BEDC-0F677823FA36/DeploymentType_57ddf73a-aece-4094-8103-d97a67dce037, revision 1) for system. AppDiscovery 9/18/2014 9:23:46 AM 2224 (0x08B0)

Did not know which site would answer =)

more info

Wsyncmgr.log sync: SMS synchronizing updates, processed 1899 out of 1899 items (100%) SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:02 PM 6892 (0x1AEC) sync: SMS performing cleanup SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:02 PM 6892 (0x1AEC) Done synchronizing SMS with WSUS Server ad.sccm.local SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 6892 (0x1AEC) Set content version of update source {EA8258B6-64BB-4FC7-BEDC-0F677823FA36} for site P01 to 1 SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 4844 (0x12EC) STATMSG: ID=6702 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ad.SCCM.local SITE=P01 PID=2020 TID=4844 GMTDATE=Thu Aug 07 19:17:04.433 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 4844 (0x12EC) Sync succeeded. Setting sync alert to canceled state on site P01 SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 4844 (0x12EC) No changes made to the SMS database, content version remains 1 SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 4844 (0x12EC) Sync time: 0d00h05m27s SMS_WSUS_SYNC_MANAGER 8/7/2014 3:17:04 PM 4844 (0x12EC) I tried to resync the software lib and nothing changed tried to redeploy My issue some software updates make it to the client but not all. Server2008r2 SCCM2012 Standalone WSUS 3.2.7600.226 I dont have the foggiest where to start to trouble shoot. I also ran Wsusutil.exe reset ReportingEvents.log WindowsUpdate.log

I fixed it! I had to wait for the wsus to finish synching. I also gave wsus full rights in SQL and ran patches WSUS-KB2720211-x64 WSUS-KB2734608-x64 Not sure which fixed it but its working

Thanks for the quick reply. SCCM2012 WSUS is local Version 3.2.7600.226 Yes WSUS installed fine I did uninstall and reinstalled P.S. Im new to this so thank you for your support