shineknox

I've built a task sequence to build and capture our reference image; windows 10. I have been successful in the build and capture task sequence. I have a couple of application installations built into the task sequence; MS Office 2016 and Chrome. So far so good. The big issue I see with the process is that there is no suspend task. I was hoping for a suspend task, so I could configure the default profile and maybe be able to use copyprofile with the sysprep task. I need to be able to set up a default profile and leverage copy profile in the build and capture task sequences. Anyone know how to accomplish this or have recommendations on configuring a default profile in the build and capture task sequence?

I've built a task sequence to build and capture our reference image; windows 10. I have been successful in the build and capture task sequence. I have a couple of application installations built into the task sequence; MS Office 2016 and Chrome. So far so good. The big issue I see with the process is that there is no suspend task. I was hoping for a suspend task, so I could configure the default profile and maybe be able to use copyprofile with the sysprep task. I need to be able to set up a default profile and leverage copy profile in the build and capture task sequences. Does anyone know how to accomplish this or have recommendations on configuring a default profile in the build and capture task sequence? Thanks, Shine

I'm just now cutting my teeth on the build and capture task sequence. Why would my system drive be x: instead of c:? Also is there a way to copy a folder to the c:\ and add a run once within the build and capture task sequence? If, so, at what step would I implement the task in the task sequence? Thanks Shine

We have 2 distribution servers and the one I need to rename is the second one we put in place. What is the procedure on renaming a distribution point server in SCCM 2012R2. The roles installed on our second DP server are Site System, State migration point, component server, and Distribution point. I need to rename the server and set a different IP address on it. Thanks, Sunshine

I need to be able to create a device collection that I can target with a Task sequence. I need the collection to populate with "active clients at risk". How would one accomplish this? Thanks, Sunshine

I'm looking to run a task in a task sequence, if the previous task fails. Can someone point me in the right direction, please? thanks, shineknox

One thing i can't stand about forums is no one responding back to how they fixed their issue. I hope this helps someone down the road. I just got off the phone with support and this was their fix as well. They said it's a client side issue with certificates being corrupt. ERROR: Error. Status code 500 returned OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) Received 1231 byte response. OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) pReply != NULL, HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2391) OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) SMP Root share info response is empty OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) ClientRequestToSMP::ClientRootShareRequestToSMP failed. error = (0x80004005). OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) ExecuteRootShareInfoRequest(sRootShareList), HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1717) OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) ClientRequestToSMP::DoRequest failed. error = (0x80004005). OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) Request to SMP 'http://myservername.domain.com'failed with error (Code 0x80004005). Trying next SMP. OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) Sleeping for 60 seconds before next attempt to locate an SMP. OSDSMPClient 7/25/2016 4:25:28 PM 5656 (0x1618) Retry number 2 OSDSMPClient 7/25/2016 4:26:28 PM 5656 (0x1618) Microsoft's response ++ It looks like there is certificate issues while performing the restoration task. ++ Please run following command under PowerShell (As Admin ) · Remove-Item -Path ‘HKLM:\SOFTWARE\Microsoft\SystemCertificates\SMS\Certificates\*’ -force; · restart-service ccmexec Sunshine

I appreciate the help. I was able to find a work around by deleting the keys located under ‘HKLM:\SOFTWARE\Microsoft\SystemCertificates\SMS\Certificates*’ on the client side and reboot the machine. Then the restores/captures work as expected. You have any ideas why this could be happening? Thanks Sunshine

Thanks for the assistance. I checked the loadstate.log on the client and it never writes to it. I'm guessing it needs to get past the request state first. thanks for the help.

YO!!!! bump!!

bump

Same issue here this product sucks and so does finding any solutions. I guess we are the only desperate enough to use it or forced to use it.

I love talking to myself. Does anyone use SCCM?

I created another DP with site migration point enabled and still a no go. List of errors below: SMP Root share info response is empty OSDSMPClient 7/25/2016 11:23:10 AM 3524 (0x0DC4) ClientRequestToSMP::ClientRootShareRequestToSMP failed. error = (0x80004005). OSDSMPClient 7/25/2016 11:23:10 AM 3524 (0x0DC4) ClientRequestToSMP::DoRequest failed. error = (0x80004005). OSDSMPClient 7/25/2016 11:23:10 AM 3524 (0x0DC4) ExecuteRestoreRequestToSMP failed (0x80004005). OSDSMPClient 7/25/2016 11:23:10 AM 3524 (0x0DC4) ExecuteRestoreRequest failed (0x80004005). OSDSMPClient 7/25/2016 11:23:10 AM 3524 (0x0DC4) Failed to run the action: Request State Store. Unknown error (Error: 00004005; Source: Unknown) TSManager 7/25/2016 11:23:10 AM 3292 (0x0CDC) Task Sequence Engine failed! Code: enExecutionFail TSManager 7/25/2016 11:23:10 AM 3292 (0x0CDC) The weird thing is that the capture state is working. Any help would be greatly appreciated. Thanks Sunshine

Biggest pile of crap I've used SCCM.

Ok, one thing I also noticed is that my components are not enabled that should be on the client. Any ideas?

I've hit this wall. I'm able to run the task sequence successfully on a machine, but I'm receiving error "Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client. If the client is not yet registered, this is expected behavior." on another machine. I've deleted record in SCCM and computer object in Active directory and re-imaged the machine; i'm still receiving the error above. The record in SCCM looks fine. This is aggravating how inconsistent SCCM is; boooooo!!!!!. Any help is greatly appreciated. Sunshine

I've deleted the computer account in Active Directory and removed the record from SCCM. I re-imaged the machine and new records were created in both Active Directory and SCCM. I'm still receiving the error below when I try to do a machine policy retrieval. Error: Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client. If the client is not yet registered, this is expected behavior. execmgr 7/21/2016 9:36:01 AM 3740 (0x0E9C) Can not find client site settings execmgr 7/21/2016 9:36:01 AM 3740 (0x0E9C) Not really sure what is going on here. The record in SCCM seems to match up with the client. Thanks Sunshine

I was successful with moving a windows 7 profile to a windows 10 machine, using a different machine. The error seemed to be related to two of my test machines; I have a pool of 8 test machines. Is there pre-checks I can setup to make sure there is no issues with machines client? The bad thing about it is that it reports fine in SCCM, but seems to be an error at the client level not thinking it's registered with SCCM. Thanks, Sunshine Baines

I've ran into a road block with using USMT on SCCM 2012 R2 version 5.00.8239.1000 and build number 8239. I've made the computer associations before running the capture and the capture works. It only fails when I run the restore task sequence. The source is a windows 7 machine and the destination is running windows 10. The whole process fails when restoring to my windows 10 machine. This is a side by side backup and restore. We are running Win 10 ADK on the SCCM server. Here are some of the errors listed. SMP Root share info response is empty OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ClientRequestToSMP::ClientRootShareRequestToSMP failed. error = (0x80004005). OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ExecuteRootShareInfoRequest(sRootShareList), HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1717) OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ClientRequestToSMP::DoRequest failed. error = (0x80004005). OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) Request to SMP 'http://servername_of_DP_MP.domain.com'failed with error (Code 0x80004005). Trying next SMP. OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) FALSE, HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1657) OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) Failed to find an SMP that can serve request after trying 4 attempts. OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) pClientRequestToSMP->Execute(migInfoFromMP.saSMPs), HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2866) OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ExecuteRestoreRequestToSMP failed (0x80004005). OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ExecuteRestoreRequestToSMP(migInfoFromMP), HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2931) OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ExecuteRestoreRequest failed (0x80004005). OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) ExecuteRestoreRequest(), HRESULT=80004005 (e:\qfe\nts\sms\client\osdeployment\osdsmpclient\main.cpp,84) OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) OSDSMPClient finished: 0x00004005 OSDSMPClient 7/20/2016 3:55:14 PM 84 (0x0054) Process completed with exit code 16389 TSManager 7/20/2016 3:55:14 PM 5232 (0x1470) Thanks, Sunshine

I have a process in place to backup machines before doing an operating system deployment; no sysprep is involved with the backup process. I did this using the ZTIbackup.wsf script that comes with MDT. In short, I've integrated MDT 2013 with SCCM 2012 R2. Is there a way to deploy the backed up image (wim) using SCCM with no sysprep? I need to be able to deploy the backed up image back to the machine; Obviously, this will be a worse case scenario. Thanks in advanced for the input. shineknox

I'm currently using SCCM 2012 R2 Version 5.00.8239.1000 build 8239. I've been given the task of transitioning over to Windows 10 from Windows 7. Unfortunately this is my first go with SCCM. I would like to deploy a bare-metal windows 10 image via PXE and leverage USMT to pull the profiles from the Windows 7 machine being migrated to windows 10; I do not want to do an in place upgrade. I've went through some how tos that I found in forums because MS has no white papers on the process; this however did not work. One thing I noticed is that deploy doesn't seem to ah, deploy; really aggravating. I monitored the ccm logs to see if I see any action and it seems to do nothing. I built the task sequence with the wizard and pointed it to the USMT package, but it never seems to kick off. Maybe I'm missing something and any help would be greatly appreciated.