xc3ss1v3 Posted February 28, 2014 Report post Posted February 28, 2014 I was always told the only dumb questions are those not asked. So, here goes. Is it possible to have remote clients PXE boot back to the primary site, but actually pull the OS images/drivers/software etc... from the local DP? It seems like this is possible because as I currently have it set, my OS images, drivers, etc... are only on the DP (Windows 7 box). Everything works fine up until the "Apply Operating System" step at which point it fails with 0x80070002. I'm guessing it's alluding to not being able to find the files necessary. Is there a particular log I can look at to see what the exact issue is? Or, does this set up even work? And, just before we go down the "why are you using a Windows 7 box," question, we don't currently have enough Server licenses to install on DP's. Thanks in advance! Quote Share this post Link to post Share on other sites More sharing options...
kevlar01 Posted March 3, 2014 Report post Posted March 3, 2014 Have you got the 'F8 support mode' enabled on your boot image? If so, press F8 when the error pops up, key in 'CMTRACE.exe', and open the smsts.log in X:\Windows\Temp.It should give more closure about what is going wrong. My guess is that your partitioning could be wrong, or that there isn't enough disk space. Quote Share this post Link to post Share on other sites More sharing options...
xc3ss1v3 Posted March 11, 2014 Report post Posted March 11, 2014 Thanks for that tidbit. That pointed me to a file not found error which led me to figure out that there was an ACL in place that was blocking that traffic between the two VLAN's. Thanks!! Quote Share this post Link to post Share on other sites More sharing options...
