Help with Deploying SCCM to Hybrid Drives

[UserInterface]

Making my own post in stead of following this one

I have a few HP 820 G1's that have a 500GB spinning disk and a 32GB flash card and I have not been able to deploy to them at all with SCCM 2007.

 

I have imported the sata drivers and created a new TS just for this model while testing and I have it set as shown in the screens below follows.

 

What I have noticed is that when booting with the HP image it only shows one drive as it is in cached mode. If I push the TS to it then it partitions it, names the drive (and i think formats it fine) but will fail the TS (unable to find a log for it).

I have the BIOS set to legacy (comes like that) and the Msata is set to allow boot.

 

I have tried every possible combination i can find but have no idea what the hell to do.

Would anyone please be able to help me with this?

[UserInterface]

Can anyone please help? I have no idea how to get this to work.

[Peter van der Woude]

You're only creating one partition, so I would set the destination to the default of Next available formatted partition.

[UserInterface]

You're only creating one partition, so I would set the destination to the default of Next available formatted partition.

 

That is what I had first but had the same issue.

[UserInterface]

Please can anyone help me. I am going crazy trying to get this to work.

[Peter van der Woude]

You have to start looking for a log file if you want more help on this... Based on the log file we can see what errors you are running into.

[UserInterface]

Worked it out. Turns out that you have to secure erase the 500GB and the 32Gb drive before you can use SCCM or even a windows CD.