Hi, all: Looking for some help troubleshooting a PXE issue. Thus far, I have set up WDS, MDT 2013, and ADK 8.1 and can successfully capture/deploy a Windows 8.1 image by running the Lite Touch.vbs script from my deployment share. While deploying in this method isn't terrible, the goal is to ensure that it can be done via PXE. I had previously been able to successfully boot Windows 7 machines with WDS, MDT 2012 Update 1, and ADK 8.0, but recently had to upgrade to roll out 8.1 images. Now I can't get the new 8.1 machines to boot via PXE. System in the example is prestaged in ADDS. Options 60 and 67 are unchecked on WDS server as DHCP and DNS are on another server.
I've enabled logging on WDS in an effort to figure out where the PXE is failing, but it doesn't tell me much. Events only indicate that wdsnbp.com was downloaded via TFTP successfully. The machines attempting to boot say the same thing. I receive the following when booting:
>>Start PXE over IPv4.
Station IP address is 10.1.50.129
Server IP address is 10.1.1.216
NBP filename is boot\x64\wdsnbp.com NBP filesize is 30832 Bytes. Downloading NBP file... Succeed to download NBP file.
System automatically reboots and goes straight into Windows. It's almost as if there's no boot image being referenced in the NBP file, but I've checked my Boot Images in WDS to ensure that an 8.1 image exists. I replaced the 8.1 boot image just in case and the issue is the same.
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.
Hi, all:
Looking for some help troubleshooting a PXE issue. Thus far, I have set up WDS, MDT 2013, and ADK 8.1 and can successfully capture/deploy a Windows 8.1 image by running the Lite Touch.vbs script from my deployment share. While deploying in this method isn't terrible, the goal is to ensure that it can be done via PXE. I had previously been able to successfully boot Windows 7 machines with WDS, MDT 2012 Update 1, and ADK 8.0, but recently had to upgrade to roll out 8.1 images. Now I can't get the new 8.1 machines to boot via PXE. System in the example is prestaged in ADDS. Options 60 and 67 are unchecked on WDS server as DHCP and DNS are on another server.
I've enabled logging on WDS in an effort to figure out where the PXE is failing, but it doesn't tell me much. Events only indicate that wdsnbp.com was downloaded via TFTP successfully. The machines attempting to boot say the same thing. I receive the following when booting:
>>Start PXE over IPv4.
Station IP address is 10.1.50.129
Server IP address is 10.1.1.216
NBP filename is boot\x64\wdsnbp.com
NBP filesize is 30832 Bytes.
Downloading NBP file...
Succeed to download NBP file.
System automatically reboots and goes straight into Windows. It's almost as if there's no boot image being referenced in the NBP file, but I've checked my Boot Images in WDS to ensure that an 8.1 image exists. I replaced the 8.1 boot image just in case and the issue is the same.
Any thoughts? Your help is appreciated!
Share this post
Link to post
Share on other sites