I have a working TS but I got a new model that we need to build and it is giving me issues - this is my first TS so please be patient -
it is a Dell 7010 and the issue comes in that it fails with the following error 0x80070070 - which has to do with available disk space - I am waiting for the techs on site to mail me the log file when they press F8 when the error occurs. :-(
the 7010 are shipped with the following disk config from Dell
If support at the remote site take the disk out and remove all partitions my TS works on this model as well but we cannot take out the disk out of each system to delete all the partitions every time
on the other models it is working just not in this one - They will also receive XE2 and 5810 models later on and I suspect that they will have the same issue
in my TS I have the following configuration
the Partitions within this step are configured as follow
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.
Hi All
I have a working TS but I got a new model that we need to build and it is giving me issues - this is my first TS so please be patient -
it is a Dell 7010 and the issue comes in that it fails with the following error 0x80070070 - which has to do with available disk space - I am waiting for the techs on site to mail me the log file when they press F8 when the error occurs. :-(
the 7010 are shipped with the following disk config from Dell
If support at the remote site take the disk out and remove all partitions my TS works on this model as well but we cannot take out the disk out of each system to delete all the partitions every time
on the other models it is working just not in this one - They will also receive XE2 and 5810 models later on and I suspect that they will have the same issue
in my TS I have the following configuration
the Partitions within this step are configured as follow
Partition name: Windows
Type: Recovery
use specific size: 300MB
File System NTFS -> Quick format enabled
---------------------------------------------------
Partition Type: EFI
Use specific size: 500MB
Files system: fat32 -> quick format
-------------------------------------------------
Partition Type : MSR
Use specific size: 128Mb----------------------------------------------
Partition name: Windows
Type: Primary
Use a percentage of free remaining space: 100%
File System: NTFS -> Quick format enabled
under "Apply Operating system" the following is configured:
apply operating system from a Captured image: -> Image Package "WIN7EntSP1 X64 en-US"
Image: 2-2
Destination: "Next available formatted partition"
thx
kind regards
Share this post
Link to post
Share on other sites