vincelewin Posted April 14, 2015 Report post Posted April 14, 2015 Help. I'm trying to get my 7440's to build win 7 via sccm. When I Pxe boot I briefly see the "preparing network connections" and then the window dis-appears and the process just hangs. I have enabled command Support and ipconfig shows no IP address. I have downloaded the dell cab plus I have also downloaded the intel drivers and the dell PE driver cabs. I have placed all the drivers on a usb stick and one by one gone through them trying to find a nic driver that works. I found an intel driver e1d6332.inf works and I can initialise it and obtain an ip address. Full path ProWin32\Pro1000\Win32\NDSI63\e1d6332.inf Next I tried to add this driver to sccm and the x86 boot image. Here I get an error "the driver does not apply to any supported OS" and it fails to import! Can anyone help me out here ive been working on this for three days now Vince Quote Share this post Link to post Share on other sites More sharing options...
Peter van der Woude Posted April 14, 2015 Report post Posted April 14, 2015 Is your site server running Windows Server 2008 R2? If so, see: https://support.microsoft.com/en-us/kb/3025419/ Quote Share this post Link to post Share on other sites More sharing options...
vincelewin Posted April 15, 2015 Report post Posted April 15, 2015 All fixed thx. The hotfixed enabled me to import those drivers but SCCM was still picky about which one it would boot with. Quote Share this post Link to post Share on other sites More sharing options...
