PH25 Posted July 27, 2015 Report post Posted July 27, 2015 I have set up a fresh instance of SCCM for the first time. Everything looks in order, just the one boundary (AD site) and boundary group. Client deploy but only shows 2 tasks (machine cycle and user cycle) and doesn't talk back to SCCM, therefore shows as clients 'none' in the console. I can see the following errors: failed to send management point list location request failed to send registration request 0x87d00231 GetDPLocations failed with error 0x80072efe Failed to get DP locations as the expected versions from MP 'ServerName' error 0x80072efe I've been looking into this for some time to no avail. Help would be massively appreciated. Quote Share this post Link to post Share on other sites More sharing options...
GarthMJ Posted July 27, 2015 Report post Posted July 27, 2015 I would check firewalls and cert.. 0x80072efe = The connection with the server was terminated abnormally Quote Share this post Link to post Share on other sites More sharing options...
clarkrpeter Posted July 29, 2015 Report post Posted July 29, 2015 I would look at the following: the CCM client setup logs in C:\Windows\ccmsetup\logs clientlocation.log and locationservices.log in the C:\Windows\CCM\Logs folder did the MP role installation complete successfully? - check the MP status in the console and the MP logs on the MP server in SMS\Logs is the client assigned to the site? Attach the logs mentioned above if you are still having issues. Quote Share this post Link to post Share on other sites More sharing options...
PH25 Posted July 30, 2015 Report post Posted July 30, 2015 We have opened everything up on central firewall and windows firewall for it, so that should be ok. MP installation seems to have completed successfully and client does have site code assigned. What can i check with regards to cert?I'm not sure im permitted to send full logs over i'm afraid (ill check that), but ClientLocation.log looks clear and states that 'client is now assigned to site 001'. However, LocationServices log is showing on of the errors from my original post 'failed to send management point list location request'Attached is the error from ccmsetupThanks for your help with this Quote Share this post Link to post Share on other sites More sharing options...
Peter van der Woude Posted July 30, 2015 Report post Posted July 30, 2015 Did you check the IIS log files on the management point to see if the client request actually reaches the management point? If it's not arriving at the management point then I'm with Garth. Check the (local) firewalls, or anything else that's in between. Quote Share this post Link to post Share on other sites More sharing options...
PH25 Posted July 31, 2015 Report post Posted July 31, 2015 I can't seem to find IIS logs. Shouldn't they be in %WINDIR%\System32\logfiles\W3SVC1 ? i can't see this folder - perhaps i dont have IIS logging turned on? Quote Share this post Link to post Share on other sites More sharing options...
PH25 Posted July 31, 2015 Report post Posted July 31, 2015 I've also tried with local firewalls on server and client turned off.Config manager on the client has a site code but seems to not be talking to the MP (everything is on one box in our setup) - despite config manager properties saying 'Assigned Management Point - <SERVER NAME>' Quote Share this post Link to post Share on other sites More sharing options...
GarthMJ Posted July 31, 2015 Report post Posted July 31, 2015 The logs are generally found here C:\inetpub\logs Quote Share this post Link to post Share on other sites More sharing options...
PH25 Posted July 31, 2015 Report post Posted July 31, 2015 Thanks. Do these lines suggest the request meets the MP or not? Quote Share this post Link to post Share on other sites More sharing options...
GarthMJ Posted July 31, 2015 Report post Posted July 31, 2015 They all show a 200 error code which is good. You need to match up the IP address to ensure that the problem client is getting a 200 error code. Quote Share this post Link to post Share on other sites More sharing options...
