How can I deploy Windows 10 Enterprise x64 with MDT 2013 Update 1 integrated with System Center 2012 R2 SP1 Configuration Manager ?

[steveakash]

as you mentioned above

[anyweb]

"For Capture Settings, select This task sequence will never be used to capture an image"

 

I didn't capture the image in this guide, so, how did you capture it ?

[steveakash]

i meant that i used your steps in detail, and for (Capture Settings) I selected This task sequence will never be used to capture an image

[anyweb]

ok and you are saying the Windows is on E: after the deployment is complete ?

[steveakash]

yes

[anyweb]

ok that's odd, works fine for me, are you sure you followed every step exactly as i explained in the guide above ?

 

any deviation may cause problems..

 

prior to Configuration Manager 2012 SP1 you would not use the Install.wim file directly from the media as Windows would end up on D: or E:, however to deal with this natively you can add a new Configuration Manager variable called OSDPreserveDriveLetter to your task sequence and set it to False before the Apply Operating System Image step.

 

OSDPreserveDriveLetter

For System Center 2012 Configuration Manager SP1 and later:

 

This variable determines whether or not the task sequence uses the drive letter captured in the operating system image WIM file when applying that image to a destination computer. In Configuration Manager with no service pack, the drive letter captured in the WIM file is used when applying the operating system image WIM file. In Configuration Manager SP1, you can set the value for this variable to False to use the location that you specify for the Destination setting in the Apply Operating System task sequence step. For more information about the Apply Operating System task sequence step, see the Apply Operating System Image section in the Task Sequence Steps in Configuration Manager topic.

[MagnumVP]

I had the same issue arise for me during this process with the exception of the OS being installed on D:\ (No CD-Rom on this machine./..with CD-Rom it was E:\) To fix it I was performed the following steps within the Task Sequence.

 

Remove the Partitions and ONLY leave the 100%. Make sure you only remove the partitions during the Install setup process. It will recreate them during the Preinstall process.

 

 

During the Preinstall Steps change that the BDEDrive is NOT assigned a drive letter.

 

 

You can leave the PreserveDriveLetters to False.

[anyweb]

Steveakash, sure try it !

[anyweb]

looks like you are missing network drivers for whatever hardware you are using

 

Error. Received 0x80072ee7 from WinHttpSendRequest.]LOG]!><time="13:40:15.991+480" date="01-12-2016" component="TSManager" context="" type="1" thread="156" file="libsmsmessaging.cpp:9044">
<![LOG[unknown host (gethostbyname failed)]LOG]!><time="13:40:16.054+480" date="01-12-2016" component="TSManager" context="" type="3" thread="156" file="libsmsmessaging.cpp:779">
<![LOG[hr, HRESULT=80072ee7 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9093)]LOG]!><time="13:40:16.054+480" date="01-12-2016" component="TSManager" context="" type="0" thread="156" file="libsmsmessaging.cpp:9093">
<![LOG[sending with winhttp failed; 80072ee7]LOG

 

[tnoob2]

A little help please!

 

I'm running SCCM2012 R2 SP1 CU2 with intergraded MDT 2013 Update 2. Following the instruction in this thread but having issues with distribute MDT toolkit package. Below is distmgr.log

 

Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 4964 (0x1364)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OPS-TITANX1.staff.copa SITE=CPA PID=1408 TID=9140 GMTDATE=Thu Jan 21 21:52:37.161 2016 ISTR0="CPA0016A" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CPA0016A" SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Retrying package CPA0016A SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Start adding package CPA0016A... SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
The Package Action is 2, the Update Mask is 268435456 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=CPA0016A, Version=1, Status=2300 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Taking package snapshot for package CPA0016A from source \\ops-titanx1\f$\MDT2013u2 Toolkit SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
MoveFileW failed for E:\SCCMContentLib\FileLib\E074\E0745DEE29B578FA35225A60938C5D591073FF1B806F61D3C3D652EDA1F81FCE.INI to F:\SCCMContentLib\FileLib\E074\E0745DEE29B578FA35225A60938C5D591073FF1B806F61D3C3D652EDA1F81FCE.INI SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
CFileLibrary::AddFile failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
CFileLibrary::AddFile failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
CContentDefinition::AddFile failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Failed to add the file. Please check if this file exists. Error 0x80070002 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
SnapshotPackage() failed. Error = 0x80070002 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
STATMSG: ID=2361 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OPS-TITANX1.staff.copa SITE=CPA PID=1408 TID=9140 GMTDATE=Thu Jan 21 21:52:37.206 2016 ISTR0="\\ops-titanx1\f$\MDT2013u2 Toolkit" ISTR1="Microsoft MDT Toolkit Package" ISTR2="CPA0016A" ISTR3="30" ISTR4="95" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CPA0016A" SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Failed to take snapshot of package CPA0016A SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=CPA0016A, Version=1, Status=2302 SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OPS-TITANX1.staff.copa SITE=CPA PID=1408 TID=9140 GMTDATE=Thu Jan 21 21:52:37.218 2016 ISTR0="Microsoft MDT Toolkit Package" ISTR1="CPA0016A" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CPA0016A" SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Failed to process package CPA0016A after 5 retries, will retry 95 more times SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Exiting package processing thread for package CPA0016A. SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:37 PM 9140 (0x23B4)
Currently using 0 out of 5 allowed package processing threads. SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:42 PM 4964 (0x1364)
The last source update time for pkg CPA000B2 is 1/20/2016 4:12:39 PM Pacific Standard Time SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:42 PM 4964 (0x1364)
The next start time for pkg CPA000B2 is 1/21/2016 4:12:00 PM Pacific Standard Time SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:42 PM 4964 (0x1364)
Sleep 1825 seconds... SMS_DISTRIBUTION_MANAGER 1/21/2016 1:52:42 PM 4964 (0x1364)

 

Troubleshooting steps including

 

1. delete MDT Toolkit package > Create new MDT Toolkit package using "Create MDT Task Sequence" ---- same error

2. delete MDT Toolkit package and source folder > create new folder > copy source files from "C:\Program Files\Microsoft Deployment Toolkit\Templates\Distribution" to newly create folder > Create new package with Data Source point to new folder. ----- same error

3. delete MDT Toolkit package and source folder > create new folder and copy source as above steps > reset NTFS file permission to everyone full permission ----- same error.

4. reinstall Windows 10 ADK ---- same error

5. uninstall MDT2013 update 2 > install MDT 2013 update 1 --- same error

6. update SCCM2012 R2 SP1 with CU2 ---- and go through above steps....same error

 

:unsure: !

 

Help Please

Thanks!