SCCM 1606 - Recovery - Your PC couldn't start properly

[RubenG]

Hi.

 

I have a strange behavior in my SCCM environment. Actually the SCCM 1606 is installed and fully patched. Until a few weeks ago it was working with no problem at all.

I have been distributing windows 10 successfully. I need to reinstall the OS in one machine through PXE. Everything works ok during the initial phases (The pc boot from WDS, the image is downloaded to the pc, the HD is partitioned and the OS is installed). The problem occurs at the time when the pc rebooted in order to continue with the installation of Windows 10. At this moment it shows a BSD "Recovery. Your PC couldn't start properly. After multiple tries the operating system on your PC failed to start so it needs to be repaired. Error code: 0xc0000001".

 

The curious is the operating system was installed the first time by this way with no error in this PC.If I install the OS in another pc which is of different model it works Ok. If I install the OS from the DVD it works OK. It looks like the problem is with the combination of SCCM and This specific model.

 

It could be a driver issue? why is happening this time and it didn't happen previously when the OS was installed the first time?

 

Any help will be appreciated.

 

Sincerely,

 

Ruben Garcia.

 

Attached Image

Edited November 29, 2016 by RubenG