dmuro Posted February 28, 2017 Report post Posted February 28, 2017 This is the first time I am trying to boot to a UEFI device. I have Server 2008 Standard with WDS, MDT 2013 Update 2, and WADK - Windows 10. DHCP is also setup on this server. IP Helper has been setup on the switch to this server also. After some research I see that I need to configure 067 Bootfile Name to SMSBoot\x64\wdsmgfw.efi. This file did not exist on my server. When I tried to PXE boot to the server by pressing the Vol - and Power buttons, it would download bootmgfw.efi and then just go to a blank blue screen. I then copied wdsmgfw.efi from a 2012 server from another department and renamed it bootmgfw.efi and put it in \RemoteInstall\Boot\x64 folder. Now when I PXE boot, it tries to connect to the WDS server but never continues (I attached picture). I also have 066 Boot Server Host Name pointing to the WDS server and 060 PXEClient configured. Can you please give me some suggestions? Quote Share this post Link to post Share on other sites More sharing options...
