glen8 Posted February 8, 2018 Report post Posted February 8, 2018 Hi all, I have an IBCM server installed in our DMZ. Everything is working great, and I am allowing it to also update member servers in the DMZ as well as internet clients. Certs are all good, logs are fine. My issue however is that the member servers in the DMZ are assigned to the wrong MP. They are going to the primary site server, not the server in the DMZ. Things I have checked: Boundaries and boundary groups are set and contain just the DMZ site server Hierarchy setting is ticked for "Clients prefer to use management points specified in boundary groups" Clients are showing up in the console as active and assigned to the correct site (DMZ). However the management server is showing the primary not the DMZ server on the clients clientlocation.log I see this line: Current assigned management point is the only assigned management point any ideas? Thanks Quote Share this post Link to post Share on other sites More sharing options...
glen8 Posted February 13, 2018 Report post Posted February 13, 2018 Typical, the minute I create this post I check the mplist to find only one server listed. I check the management point on the dmz server and it's set to "internet clients only". I did change this to "both internet and intranet" but who knows why it never saved. also forgot to tick the second MP server under (sites, management points)....oops Trying again!! Quote Share this post Link to post Share on other sites More sharing options...