Looking for some help with my WDS setup to push an image to my HP Elitebook 840 G6 that uses an Intel I219-V Nic.
I captured my setup image but had to move it over manually because the correct driver was not slipstreamed in, so I am not trying to add the correct driver to the boot image so I can image the 100 of these that I have.
The laptop boots fine, gets an address from the WDS server, then attempts to begin setup but fails at obtaining an IP address. I have tried the following, using DISM because I am on 2012 server and cannot add Win 10 drivers using the wizard.
Taking the drivers from the working install - e1d68x84 - Wont load
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.
Looking for some help with my WDS setup to push an image to my HP Elitebook 840 G6 that uses an Intel I219-V Nic.
I captured my setup image but had to move it over manually because the correct driver was not slipstreamed in, so I am not trying to add the correct driver to the boot image so I can image the 100 of these that I have.
The laptop boots fine, gets an address from the WDS server, then attempts to begin setup but fails at obtaining an IP address. I have tried the following, using DISM because I am on 2012 server and cannot add Win 10 drivers using the wizard.
Taking the drivers from the working install - e1d68x84 - Wont load
Adding these drivers e1d65x64
Adding all the drivers from certain packs ie this one - https://www.dell.com/support/article/en-us/how13444/optiplex-7040-windows-10-driver-pack?lang=en
A few of the ideas above I got from these forums but just cannot get this computer to load up. Can someone point me in the right direction?
Thanks
Denis
Share this post
Link to post
Share on other sites