I have the following set up (all with protected boundaries based on their respective site subnet):
G30 UK Primary Site
| |-AT-DP
| |-BE-DP
| |-DK-DP
| |-PT-DP
| |-SE-DP
| |-Test-DP
|
|-G31 Germany Secondary Site
|
|-G32 Italy Secondary Site
|
|-G33 France Secondary Site
|
|-G34 Spain Secondary Site
Currently I have G30 set as a PSP, which works fine and dandy. I've been given a project to get the other sites working as PSP's, so I built the Test-DP server, and installed WDS and PSP onto it. Everything works fine, the clients PXE from the local Test-DP.
My next step was to get G32 working, as that's our next priority, yet try as I might I've not had any joy. I've performed exactly the same steps I did to make Test-DP work, but I cannot get G32 working. I installed WDS and the PSP onto the server, and then replicated my x86 and x64 boot images to it. They exist in the C:\RemoteInstall folder, along with all the files under SMSBoot. However, if I restart the WDS service, I get the following in smspxe.log
The files exist and are accessible, I've even checked permissions against the G30 server, and they're identical. Thinking this was a problem with the server, I then proceeded to perform exactly the same steps on G34, but I get exactly the same issue.
Suspicion overcame me, so I perform the same steps once again on DK-DP, and that's working fine (as with Test-DP). Therefore my issue exists only on Secondary Sites.
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.
Hi,
I have the following set up (all with protected boundaries based on their respective site subnet):
G30 UK Primary Site
| |-AT-DP
| |-BE-DP
| |-DK-DP
| |-PT-DP
| |-SE-DP
| |-Test-DP
|
|-G31 Germany Secondary Site
|
|-G32 Italy Secondary Site
|
|-G33 France Secondary Site
|
|-G34 Spain Secondary Site
Currently I have G30 set as a PSP, which works fine and dandy. I've been given a project to get the other sites working as PSP's, so I built the Test-DP server, and installed WDS and PSP onto it. Everything works fine, the clients PXE from the local Test-DP.
My next step was to get G32 working, as that's our next priority, yet try as I might I've not had any joy. I've performed exactly the same steps I did to make Test-DP work, but I cannot get G32 working. I installed WDS and the PSP onto the server, and then replicated my x86 and x64 boot images to it. They exist in the C:\RemoteInstall folder, along with all the files under SMSBoot. However, if I restart the WDS service, I get the following in smspxe.log
================= PXE Provider loaded. ===================== smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Init Policy Provider settings smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Machine is running Windows Longhorn. (NTVersion=0X601, ServicePack=0) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Reloading PXE Provider Settings. cached=0 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Loaded PXE settings from reg key HKLM\Software\Microsoft\SMS\Identification:
SMS Site Settings:
Server: IT-SCCM-DP
SiteCode: G32
Parent SiteCode: G30
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Cannot read the registry value of MACIgnoreListFile (80070002) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Loaded PXE settings from reg key HKLM\Software\Microsoft\SMS\PXE:
PXE Settings:
IsActive: Yes
SupportUnknownMachines: No
MACIgnoreListFile: <empty>
ResponseDelay: 0
CacheExpire: 3600
HTTP Port: 80
HTTPS Port: 443
IISSSLState: 0x0
BindPolicy: Exclude <empty>
TRK: <non empty>
SiteSignCert: <empty>
Root CA Certs: <empty>
PXE GUID: 7c3fffc0-1575-49b2-85ae-b00fd9bdefdd
PXEPassword: <empty>
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Loaded TFTP settings from reg key HKLM\System\CurrentControlSet\Services\WDSSERVER\Providers\WDSTFTP:
TFTP Settings:
Directory: C:\RemoteInstall
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
MAC Ignore List Filename in registry is empty smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Loaded Database settings from reg key HKLM\Software\Microsoft\SMS\PXE:
Database Settings:
Server: EUROPESQL
Database: SMS_G30
User: <empty>
Password: <empty>
Use Integrated Security: No
Impersonation Required: No
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
PXE Provider Settings Changed smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Querying Database for Cert with GUID: 7c3fffc0-1575-49b2-85ae-b00fd9bdefdd smspxe 05/10/2010 11:21:38 3984 (0x0F90)
inside GetPxeCert SmsPXE 05/10/2010 11:21:38 3984 (0x0F90)
Executing PxeGetCert(7c3fffc0-1575-49b2-85ae-b00fd9bdefdd) SmsPXE 05/10/2010 11:21:38 3984 (0x0F90)
CDatabaseProxy :: GetPxeCert succeeded: 7c3fffc0-1575-49b2-85ae-b00fd9bdefdd \\IT-SCCM-DP <non empty> SmsPXE 05/10/2010 11:21:38 3984 (0x0F90)
Loaded PXE settings from DB: PXE Cert: <non empty>
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Site Code: , Parent Site Code: smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Executing PXE_GetSiteTypeAndDefaultMP(G32) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
GetSiteTypeAndDefaultMP: SiteType=1 DefaultMP=IT-SCCM-DP.AD.GARMIN.COM smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Site Type: 1 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
GetUnknownMachineResource (G30,x86): smspxe 05/10/2010 11:21:38 3984 (0x0F90)
GetUnknownMachineResource: c534a5aa-e392-4fcd-a6cd-12849d5e9fdb, 4 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
GetUnknownMachineResource (G30,x64): smspxe 05/10/2010 11:21:38 3984 (0x0F90)
GetUnknownMachineResource: cd43ead2-9371-4199-b8a6-5c5b56d72d23, 5 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Loaded PXE settings from DB: Unknown machine GUIDs: (x86) c534a5aa-e392-4fcd-a6cd-12849d5e9fdb, (x64) cd43ead2-9371-4199-b8a6-5c5b56d72d23 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Initializing PXEPerfObject. smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Executing LookupDevice(, 00:00:00:00:00:00) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
CDatabaseProxy :: LookupDevice succeeded: 0 0 0 0 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Failed to read PXE settings.
The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Failed to read PXE settings.
The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Found new image SMSPKG\G3000001 smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Opening image file C:\RemoteInstall\SMSImages\SMSPKG\G3000001\boot.G3000001.wim smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Failed to read PXE settings.
The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Found Image file: C:\RemoteInstall\SMSImages\SMSPKG\G3000001\boot.G3000001.wim
PackageID: SMSPKG\G3000001
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Closing image file C:\RemoteInstall\SMSImages\SMSPKG\G3000001\boot.G3000001.wim smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Mutex was not owned. Now have ownership. smspxe 05/10/2010 11:21:38 3984 (0x0F90)
Opening image file C:\RemoteInstall\SMSImages\SMSPKG\G3000001\boot.G3000001.wim smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Applying image 1 to volume C:\Windows\TEMP\PXEBootFiles smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Closing image file C:\RemoteInstall\SMSImages\SMSPKG\G3000001\boot.G3000001.wim smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Found new image SMSPKG\G3000002 smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Opening image file C:\RemoteInstall\SMSImages\SMSPKG\G3000002\boot.G3000002.wim smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Failed to read PXE settings.
The system cannot find the file specified. (Error: 80070002; Source: Windows) smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Found Image file: C:\RemoteInstall\SMSImages\SMSPKG\G3000002\boot.G3000002.wim
PackageID: SMSPKG\G3000002
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Closing image file C:\RemoteInstall\SMSImages\SMSPKG\G3000002\boot.G3000002.wim smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Mutex was not owned. Now have ownership. smspxe 05/10/2010 11:21:40 3984 (0x0F90)
Opening image file C:\RemoteInstall\SMSImages\SMSPKG\G3000002\boot.G3000002.wim smspxe 05/10/2010 11:21:41 3984 (0x0F90)
Applying image 1 to volume C:\Windows\TEMP\PXEBootFiles smspxe 05/10/2010 11:21:41 3984 (0x0F90)
Closing image file C:\RemoteInstall\SMSImages\SMSPKG\G3000002\boot.G3000002.wim smspxe 05/10/2010 11:21:41 3984 (0x0F90)
PXE Provider finished loading. smspxe 05/10/2010 11:21:42 3984 (0x0F90)
The files exist and are accessible, I've even checked permissions against the G30 server, and they're identical. Thinking this was a problem with the server, I then proceeded to perform exactly the same steps on G34, but I get exactly the same issue.
Suspicion overcame me, so I perform the same steps once again on DK-DP, and that's working fine (as with Test-DP). Therefore my issue exists only on Secondary Sites.
So I'm stuck - HELP !?
Share this post
Link to post
Share on other sites