sothpaw Posted June 27, 2011 Report post Posted June 27, 2011 We are trying to image HP 2540p Elitebook laptops and we are getting this error message: Failed to Run Task Sequence. An error occurred while starting the task sequence (0x80070002). For more information please contact your system administrator or helpdesk operator. SMSTS Log shows failure in Network – No DHCP address is given after PE Starts. CustomPE Image is failing on one network card driver for sure. Error: Actions to perform: Add ConfigMgr binaries Enable Windows PE command line support Add drivers Success: Drivers that will be included: Intel® 82567LM Gigabit Network Connection Intel® 82567LM-2 Gigabit Network Connection Intel® 82567LM-3 Gigabit Network Connection Intel® 82567LM-2 Gigabit Network Connection Intel® Centrino® Advanced-N 6230 Intel® Centrino® Advanced-N 6230 Error: Failed to import the following drivers: Intel® 82567LM Gigabit Network Connection - Failed to inject a ConfigMgr driver into the mounted WIM file Error: The wizard detected the following problems when updating the boot image. Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file Failed to inject a ConfigMgr driver into the mounted WIM file The ConfigMgr Provider reported an error.: ConfigMgr Error Object: instance of SMS_ExtendedStatus { Description = "Failed to insert OSD binaries into the WIM file"; ErrorCode = 2152205056; File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp"; Line = 4262; ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook"; Operation = "ExecMethod"; ParameterInfo = "SMS_BootImagePackage.PackageID=\"RED000EB\""; ProviderName = "WinMgmt"; StatusCode = 2147749889; Quote Share this post Link to post Share on other sites More sharing options...
0 Trevor Sullivan Posted June 29, 2011 Report post Posted June 29, 2011 I'd recommend deleting the existing driver out of the console, as well as on the filesystem. Then, download the latest driver directly from Intel, import it, assign it to your WinPE boot image, and perform an update on your boot images. Post back if this helps. Cheers, Trevor Sullivan http://trevorsullivan.net http://twitter.com/pcgeek86 Quote Share this post Link to post Share on other sites More sharing options...
We are trying to image HP 2540p Elitebook laptops and we are getting this error message:
Failed to Run Task Sequence.
An error occurred while starting the task sequence (0x80070002). For more information please contact your system administrator or helpdesk operator.
SMSTS Log shows failure in Network – No DHCP address is given after PE Starts.
CustomPE Image is failing on one network card driver for sure.
Error: Actions to perform:
Add ConfigMgr binaries
Enable Windows PE command line support
Add drivers
Success: Drivers that will be included:
Intel® 82567LM Gigabit Network Connection
Intel® 82567LM-2 Gigabit Network Connection
Intel® 82567LM-3 Gigabit Network Connection
Intel® 82567LM-2 Gigabit Network Connection
Intel® Centrino® Advanced-N 6230
Intel® Centrino® Advanced-N 6230
Error: Failed to import the following drivers:
Intel® 82567LM Gigabit Network Connection - Failed to inject a ConfigMgr driver into the mounted WIM file
Error: The wizard detected the following problems when updating the boot image.
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
The ConfigMgr Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
{
Description = "Failed to insert OSD binaries into the WIM file";
ErrorCode = 2152205056;
File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
Line = 4262;
ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
Operation = "ExecMethod";
ParameterInfo = "SMS_BootImagePackage.PackageID=\"RED000EB\"";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
Share this post
Link to post
Share on other sites