Jump to content


anyweb

using SCCM 2012 RC in a LAB - Part 8. Deploying Windows 7 X64

Recommended Posts

Sorry for the delayed response, but I've been trying to figure these out on my own. In regard to the TS not completing, it was definitely a driver issue and that has been resolved. However... no matter what I do, I cannot get the deploy TS to let the drive be labeled as C:\. I've tried putting in the _OSDPreserveDriveLetter variable which didn't seem to help. I even disabled the default format steps that are included when the TS is originally created and made my own simple format and partition step. Still the same result no matter what I try.

 

Completely at a loss here :(

Share this post


Link to post
Share on other sites

Hi Friend,

 

I've configured complete SCCM environment using your portal which is very helpfull for beginnger.

 

Mean while I've got struck during the OS deployment, Could you please put on the rigth track

 

Find the details of the issue.

 

I've configured sccm environment using VMware workstation 10.0

 

done the deloyment configuration completely, but in the new machine(wihtout OS) after getting booted from network, it prompting an error:

 

PXE-T04 Access voilation,

 

(Also I've the details of SCCM in BOOTP under DHCP)

 

Kindly help in resolving.

 

Thanks,

Amees

Share this post


Link to post
Share on other sites

Hello. Wondering if I can get some help with a few things. The way I'm looking to do my backups and restores are as follows.

 

Older computer - Capture userstate/Files - labels them as computer name on network location.

New computer - Restore userstate/files by entering old computers name.

 

This is how we had it setup with MDT, how can I do this in system center? I don't want to restore files bassed off of the computers primary users as We have alot of shared computers and it would make the most since if I had a task sequence to backup the old computer files to a network location and then had a restore task sequence that prompted for the computer name and restored the files from the old machine. Also if there is a way to do UEL:90 and restore only user profiles from the last 90 days.

 

Any thoughts or ideas would be great! We are on the final road to system center and didn't think USMT was that complicated.

 

 

Thanks!

Share this post


Link to post
Share on other sites

Perfect! So I made a capture TS and it took about 30 min to capture and the file is about 4 gigs. However when I go to the computer and deploy the Restore TS it completes in about 20 seconds and says it was sucessfull but didn't restore anything? Any ideas? Appriciate all the help!

 

Also my migration status just says in progress. Even after the restore TS says it completed....

 

I do see this in the laodstate log on the machine I am trying to restore to.

[0x000000] The account 3HP2DD1\setup is chosen for migration, but the target does not have account 9WLPK02\setup. See documentation on /lac, /lae, /ui, /ue and /uel options.

Share this post


Link to post
Share on other sites

This is waht I pulled from the SMSTS log on the computer I am trying to restore to. I see lots of "fails"

 

 

Failed to run the action: Release User State Storage.
Unknown error (Error: 00004005; Source: Unknown) TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set authenticator in transport TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a global environment variable _SMSTSLastActionRetCode=16389 TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Clear local default environment TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Let the parent group (Restore User Files and Settings) decides whether to continue execution TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
The group (Restore User Files and Settings) ignored action failure and continue execution on the next step following the group. TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Updated security on object C:\_SMSTaskSequence. TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a global environment variable _SMSTSNextInstructionPointer=5 TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a TS execution environment variable _SMSTSNextInstructionPointer=5 TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a global environment variable _SMSTSInstructionStackString= TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set a TS execution environment variable _SMSTSInstructionStackString= TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Save the current environment block TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
The task exeuction engine successfully completed the execution TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Set authenticator in transport TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
**************************************************************************** TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Execution engine result code: Success (0) TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Cleaning Up. TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Removing Authenticator TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Cleaning up task sequence folder TSManager 6/26/2014 12:32:27 PM 5372 (0x14FC)
Unable to delete file C:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Failed to delete directory 'C:\_SMSTaskSequence' TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
SetNamedSecurityInfo() failed. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
SetObjectOwner() failed. 0x80070005. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
RemoveFile() failed for C:\_SMSTaskSequence\TSEnv.dat. 0x80070005. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
RemoveDirectoryW failed (0x80070091) for C:\_SMSTaskSequence TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Unregister TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
==========[ TsProgressUI started in process 880 ]========== TsProgressUI 6/26/2014 12:32:28 PM 5740 (0x166C)
Unregistering COM classes TsProgressUI 6/26/2014 12:32:28 PM 5740 (0x166C)
Shutdown complete. TsProgressUI 6/26/2014 12:32:28 PM 5740 (0x166C)
Process completed with exit code 0 TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Successfully unregistered TS Progress UI. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Start to cleanup TS policy TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
End TS policy cleanup TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Task Sequence Manager ServiceMain finished execution. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Task Sequence Manager service will be reconfigured TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Task Sequence Manager service reconfigured successfully TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Sending success status message TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Set authenticator in transport TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
End program: TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)
Successfully finalized logs to SMS client log directory from C:\WINDOWS\CCM\Logs TSManager 6/26/2014 12:32:28 PM 5372 (0x14FC)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.