using SCCM 2012 RC in a LAB - Part 10. Using Prestart and Extrafiles to get more out of UDA

[sumyun]

Hello anyweb, are those log files sufficient for the troubleshoot? Thanks!

[anyweb]

i didnt see any reference to UDA in your smsts.log file, check again, verify it's being set in your task sequence like i've specified in the guide ok ?

[sumyun]

anyweb,

I was trying to copy the log files by deploying the TS again. It works this time~~~ I can see the OSD Defined primary user now. Thank you very much for the follow up!

[yyyyuuuu386]

thank anyweb very much

[bfry24]

In Part 9, I deployed the PXE on the second VM. Was stuck on the PXE not progressing to the F12 button. I went back thru all the steps in Part 9 and it finally worked.

Readin Part 10, I went and deleted that VM from SCCM, redid the import to that Deploy Group, but am still getting just the PXE not progressing to the point that I can press F12.

 

Any ideas?

[anyweb]

is the computer in a collection that the task sequence is advertised to ? what does your smspxe.log file reveal ?

[bfry24]

This is what repeats in the SMSPXE.log:

 

Set media certificate in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:54:43 PM 3400 (0x0D48)

PXE::CBootImageManager::FindMatchingArchitectureBootImage SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set media certificate in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Set authenticator in transport SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777239" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>

SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

Client Identity: {38B78A4C-E32A-4DA9-A26B-E317B43F895D} SMSPXE 2/23/2012 6:55:15 PM 3400 (0x0D48)

 

Seems like the Client ID is missing.

 

DISREGARD THIS.

[bfry24]

After being able to redo the PXE I ran into a few issues. I was unable to press the F8 key to copy the CMTrace program over during the installation. Upon completed and going to the My Devices section, the message I received stated: This setting cannot be configured because of a network communications or a configuration problem.

Once the system completed the installation and I logged in, I copied the CMTrace program to the root of the C:\ drive. Browsing to the C:\Windows\CCM\Logs directory, there is no log titled AppEnforce.log. The first log is titled CAS.log Firefox is not installed either.

 

[zifou]

Hello,

 

Just after enter the username, I get this message:

I press "OK" the message disappears, then I can't do nothing!

When I press "NEXT" on the "Welcome to the task sequence wizard" nothing happens.

I don't why, do you've an idea?

 

Thank's in advance.

[Tjindarr]

Did you set the SMSTSAssignUserMode to Auto on the collection or via task sequence variable? If its not set the default value is "Pending" and will wait for approval.