how can I deploy Windows XP SP3 using SCCM 2007 SP1 - Part 2

[anyweb]

This guide assumes you have installed SCCM 2007 SP1 and then configured it as outlined here in Part 1 you must then do the additional configuration outlined in Part 2, and you must have completed the final configuration tasks in Part 3. Lastly you must be able to deploy an application using SCCM 2007

 

In addition to the above you must have completed Part 1 of this guide

 

 

Create the Task Sequence

 

right click on Task Sequences and choose New Task Sequence

 

 

choose the second option (Build and Capture a reference operating system image)

 

 

fill in your Task Sequence Information

 

 

click browse and select our X86 boot image

 

Note: if you don't see the x86 windows PE boot enviroment for SCCM 1.0 EN-US image listed then follow these steps first.

 

 

 

 

On the Install Windows screen click on Browse and select the XP SP3 operating system install package we created in Part 1.

 

 

Input your product key and make sure to enable the local Administrator account,

 

 

Configure Network

 

Here we need to enter our network configuration and click next, choose Join Workgroup (recommended best practise). Although joining the domain will work just fine you may have GPO's in place, or startup scripts (login scripts) etc which may taint your master image, keeping it off the domain will keep it clean.

 

on the Install ConfigMgr screen, browse to the Predefined ConfigMgr Client Package we created earlier

 

 

 

for the Updates and Software screens choose don't install any (ie: next, next)

 

for the System Preparation screen click on browse and choose the sysprep package we created earlier

 

 

fill in the image properties

 

 

On the Capture image screen, browse to a share on your network for copying the image to, and give the file a name

 

eg:

\\WIN-AE2V1IRN067\captures\xpsp3r.wim

 

fill in your user account for capturing the image with, I use SMSadmin

 

 

click next, next and close at the confirmation screen

 

[Kingskawn]

How to customize a winxp build let's I want the classic theme, my icones must be in 'details' and the cleanup wizard must be unchecked with the capture function? I can do it when I install a machine with the winxp cd and boot after that with imagex to capture the wim file myself.

[eswar]

Hi,

I have followed the instructions which you have provided.when my mechine boots up and it gets ip address from DHCP server and it doenloaded WDSNBP and it contact server 192.168.150.150(my server).once it done with this,it prompts a screen like windows is downloading files and after finish this it reboots with an error attached the same.is it the problem with WIM images that i am using to install it.

[Peter van der Woude]

This screen is logic after a reboot, it will go away after you select "Clear Last PXE Advertisement". But I think your problem is before that. What axactly happens before the restart?

[dyos]

see here

 

I'm trying to break down my XP build and capture into 2 parts. One the build and two the capture. This way I have a pause in between so I can load custom software/settings etc. My question is how do I separate the capture phase from the build phase.

 

 

Attached is the task process I believe the way it is supposed to be. My question is do I need to add the "restart in pe phase" to the capture phase? Is this the proper way to set this up? Any help would be appreciated.

[anyweb]

i think you have answered your own question, now all you have to do is test it

[dyos]

I'm trying to break down my XP build and capture into 2 parts. One the build and two the capture. This way I have a pause in between so I can load custom software/settings etc. My question is how do I separate the capture phase from the build phase.

 

 

Attached is the task process I believe the way it is supposed to be. My question is do I need to add the "restart in pe phase" to the capture phase? Is this the proper way to set this up? Any help would be appreciated.

 

Ok I have it setup like the 3rd box in the image above. I added this task sequence to a collection and rebooted the PC. But it did not work. Here are the errors i received.

 

 

The step (Install Deployment Tools) must be running in full OS TSManager 9/1/2009 5:32:39 PM 1428 (0x0594)

Failed to run the action: Install Deployment Tools.

The request is not supported. (Error: 80070032; Source: Windows) TSManager 9/1/2009 5:32:39 PM 1428 (0x0594)

The execution of the group (Capture the Reference Machine) has failed and the execution has been aborted. An action failed.

Operation aborted (Error: 80004004; Source: Windows) TSManager The execution of the group (Capture the Reference Machine) has failed and the execution has been aborted. An action failed.

Operation aborted (Error: 80004004; Source: Windows) TSManager 9/1/2009 5:32:39 PM 1428 (0x0594)

9/1/2009 5:32:39 PM 1428 (0x0594)

Failed to run the last action: Install Deployment Tools. Execution of task sequence failed.

The request is not supported. (Error: 00000032; Source: Windows) TSManager 9/1/2009 5:32:39 PM 1428 (0x0594)

Task Sequence Engine failed! Code: enExecutionFail TSManager 9/1/2009 5:47:51 PM 1428 (0x0594)

Task sequence execution failed with error code 80004005 TSManager 9/1/2009 5:47:51 PM 1428 (0x0594)

[dyos]

Ok, so I changed the setting to this.

Cleared PXE and rebooted into PE environment. After PC rebooted here are my error logs.

 

The step (Install Deployment Tools) must be running in full OS TSManager 9/1/2009 7:44:29 PM 1448 (0x05A8)

 

Failed to run the action: Install Deployment Tools.

The request is not supported. (Error: 80070032; Source: Windows) TSManager 9/1/2009 7:44:29 PM 1448 (0x05A8)

 

 

The execution of the group (Capture the Reference Machine) has failed and the execution has been aborted. An action failed.

Operation aborted (Error: 80004004; Source: Windows) TSManager 9/1/2009 7:44:29 PM 1448 (0x05A8)

 

Failed to run the last action: Install Deployment Tools. Execution of task sequence failed.

The request is not supported. (Error: 00000032; Source: Windows) TSManager 9/1/2009 7:44:29 PM 1448 (0x05A8)

 

Task Sequence Engine failed! Code: enExecutionFail TSManager 9/1/2009 7:59:42 PM 1448 (0x05A8)

 

 

Task sequence execution failed with error code 80004005 TSManager 9/1/2009 7:59:42 PM 1448 (0x05A8)

 

Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager 9/1/2009 7:59:42 PM 1448 (0x05A8)

[dyos]

Perhaps I'm doing this wrong and I shouldn't be booting into PE environment to capture my image? If not how do I initiate the capture process?

[dyos]

So in this step I tried to disable the step of booting into PE environment

 

The step (Install Deployment Tools) must be running in full OS TSManager 9/1/2009 8:16:25 PM 1440 (0x05A0)

 

Failed to run the action: Install Deployment Tools.

The request is not supported. (Error: 80070032; Source: Windows) TSManager 9/1/2009 8:16:25 PM 1440 (0x05A0)

 

The execution of the group (Capture the Reference Machine) has failed and the execution has been aborted. An action failed.

Operation aborted (Error: 80004004; Source: Windows) TSManager 9/1/2009 8:16:25 PM 1440 (0x05A0)

 

Failed to run the last action: Install Deployment Tools. Execution of task sequence failed.

The request is not supported. (Error: 00000032; Source: Windows) TSManager 9/1/2009 8:16:25 PM 1440 (0x05A0)

 

Task Sequence Engine failed! Code: enExecutionFail TSManager 9/1/2009 8:31:37 PM 1440 (0x05A0)

 

Task sequence execution failed with error code 80004005 TSManager 9/1/2009 8:31:37 PM 1440 (0x05A0)

 

 

Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager 9/1/2009 8:31:38 PM 1440 (0x05A0)

[anyweb]

here's one i made earlier, does this help ?