Problem installing Patches during Build&Capture, Command line support doenst work

[Bumbi85]

Hi, ive followd the RTM Guide along with the guide for Build and Capture.

The VMWare client boots fine with pxe, and OS installation works fine and it captures the media without any problem.

But it wont install the patches.

 

I have downloaded and deployed all avaible windows 7 patches except a few and deployed it towards my Build&Capture collection and added the following in the "setup configmgr" step: smsmp=sccm2012.labb.local

 

I have also check the "Enabled Command line support" option on the bootimg, but it dont want to appear when i hit F8.

 

Any ideas?

 

//Bumbi85

[anyweb]

did you apply the command support change to both architecture boot images ? we really need your smsts.logs to help

[Bumbi85]

Yeah i did that, i uppdated the DP's now. And so far command line seems to work now.

I will try and get a hold of the smsts.log

[Bumbi85]

Saw this that refered to the update:

 

FALSE, HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\installswupdate.cpp,1256) InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

Timedout waiting for updates refresh complete notification InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

WaitForRefreshUpdatesComplete(spInstall), HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\installswupdate.cpp,1314) InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

RefreshUpdates(), HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\installswupdate.cpp,906) InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

InstallUpdates(pInstallUpdate, tType, sJobID, sActiveRequestHandle), HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\main.cpp,248) InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

Setting TSEnv variable SMSTSInstallUpdateJobGUID= InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

Process(pInstallUpdate, tType), HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\main.cpp,304) InstallSWUpdate 2012-08-13 13:37:35 2848 (0x0B20)

Process completed with exit code 2147943860 TSManager 2012-08-13 13:37:35 2904 (0x0B58)

!--------------------------------------------------------------------------------------------! TSManager 2012-08-13 13:37:35 2904 (0x0B58)

Failed to run the action: Install Updates.

This operation returned because the timeout period expired. (Error: 800705B4; Source: Windows) TSManager 2012-08-13 13:37:35 2904 (0x0B58)

MP server http://SCCM2012.labb.local. Ports 80,443. CRL=false. TSManager 2012-08-13 13:37:35 2904 (0x0B58)

[Bumbi85]

I seem to have found the issue, was looking in the WUAhandler.log on an installed client and found this:

 

Group policy settings were overwritten by a higher authority (Domain Controller) to: Server http://XXXXXX:8530 and Policy ENABLED WUAHandler 2012-08-20 15:33:36 2728 (0x0AA8)

Failed to Add Update Source for WUAgent of type (2) and id ({7C736AAF-FA9F-44F0-8E63-0E5D7A6AF2A3}). Error = 0x87d00692. WUAHandler 2012-08-20 15:33:36 2728 (0x0AA8)

 

I remebered adding a policy to push the sccm klient to the computer using windows update, even thou it's the same server it bugged when trying to push patches using SCCM klient.

After i removed the policy the patching started on the client.

 

Will try build and capture next.

[Bumbi85]

Fixed patching with an installed client in that collection, but when i try a build and capture on the client the problem persists.

Continueing troubleshooting...

[Peter van der Woude]

Things to look at are: Boudaries, make sure the clients Ip address is part of a Boundary. Management Point, make sure the client can find the MP (as it can not connect to the AD).

[Nick]

Had the same issue. We moved our MP recently and the build and capture task sequence for one of our least used images was still pointing to the old MP. fixed it and now it pulls updates again, thanks!