using System Center 2012 Configuration Manager - Part 7. Build and Capture Windows 7 X64 SP1

[win7deploy]

Hi

 

I´m trying to deploy Win7 to a desktop, I followed all the steps but when i try to start the computer i get this message.

 

pxe-e53 no boot filename received

 

What happen if my computer is in a different VLAN? What can i do?

[keywan]

Hi anyweb,

 

Yes I am booting my noteboot in the same network area and it the network as my Configuration Manager PXE enabled distribution point.

 

My step for that are:

 

1) in the bios I put the boot option on "Network LAN"

2) booting the notebook , I see this dos message

 

 

With MAC ADDR 8C:73:6E:08:76:57 GUID ####################. But I see while the booting notebook a other GUID number as in sccm2012. I am goging to "Asset and Compliance"-->Devices-->choose my notebook---properties--General, here I see a different GUID number. Is it the the problem?

[anyweb]

Posted Yesterday, 04:42 PM

after much head scratching it dawned on me that having SP1 in my test lab might be confusing the issue. Sure enough, the OSD has changed slightly 'by design'

https://connect.micr...e-task-sequence

 

Looking forward to some SP1 guides

 

 

 

there are SP1 guides already if you look here (look at the Windows 8 posts, UEFI, pre-provision BitLocker and more), but for this series of guides I will stick with the RTM release until SP1 is released to manufacturing.

[keywan]

Hi anyweb again me,

 

I have changed my Notebook and set up with desktop machine. Now I dont get any error message, but it tries to get a IP-Address from DHCP but I see only ....................................

I happend nothing. If I got smspxe.log file , I see there two points:

 

1) Set media certificate in transport

2) Set authenticator in trasnport

 

I see to reply both points

 

Any Idea?

[anyweb]

did you enable PXE ability on both boot images, did you enable it on the DP, did you enable it on the task sequence deployment ?

 

what does the SMSPXE.log file tell you

[keywan]

Hi Anyweb,

 

I did enalbe follow:

 

1) "Deploy this boot image from the PXE service point" on both boot images

2) "Make available to boot media and PXE,

 

I dont know what do you mean with that "did you enable it on the DP" Where can I do that?

 

 

Here the log file

 

Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777225" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>

SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC)

 

Client Identity: cd1ded9f-ff30-4350-a59d-d6381c8b00b4 SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC)

Set media certificate in transport SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC)

Set authenticator in transport SMSPXE 09.10.2012 14:54:46 2988 (0x0BAC)

PXE::CBootImageManager::FindMatchingArchitectureBootImage SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

 

Getting boot action for unknown machine: item key: 2046820352 SMSPXE 09.10.2012 16:54:02 2980 (0x0BA4)

 

 

 

Set media certificate in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

Set authenticator in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

Set authenticator in transport SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

 

Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777225" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>

SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

 

Client Identity: cd1ded9f-ff30-4350-a59d-d6381c8b00b4 SMSPXE 09.10.2012 14:54:48 2988 (0x0BAC)

 

Set media certificate in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC)

Set authenticator in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC)

Set authenticator in transport SMSPXE 09.10.2012 14:54:49 2988 (0x0BAC)

 

and so go on

 

Tell me please that in Part

using SCCM 2012 RC in a LAB - Part 7. Build and Capture Windows 7 X64

 

You wrote that

This post has been superseded by the following post for Configuration Manager 2012 RTM.

 

That means you dont should to use this part? If I am going to "followin post" ,

 

they link me to http://community.inv...-in-wordpress/.

 

How can I access to the new post?

 

Thanks

[anyweb]

oops that's an error, i'll fix the link now..

 

FIXED !

[keywan]

thanks anyweb for fix

[keywan]

Now I can boot my machine with PXE, but It reboot by the point

 

Preparing Network connections.......

..

1) Windows is loading files (IP :my sccm2012 server: File: \SMSboot\boot.sdi)

(IP :my sccm2012 server: File: \SMSImages\dig\boot.dig2002.wim

2) Windows is starting up.........

3)Preparing Network connections.......

 

 

Here reboot my machine again

[keywan]

I did hit F8 and check smsts.log and ipconfig.By typing ipconfig, it display "Windows IP Configuration"

 

In the smsts.log I see follow Error message:

 

Failed to download pxe variable file. Code(0x00000001)

PxeGetPxeData failed with 0x80004005

 

Is it a driver problem or what?

 

How can I add a new WINPE driver for NIC?