using System Center 2012 Configuration Manager - Part 7. Build and Capture Windows 7 X64 SP1

[bdazle]

HI guys,

wondering if anyone has seen this error before. I am attempting to pxe boot a hyperV virtual machine and complete a build and capture. It successfully formats the disk and gets to the applying operating system stage and then halts. This is what is listed in smsts.log

 

 

-Failed to save the current environment block. This is usually caused by a problem with the program.

The parameter is incorrect (Error:80070057)

 

Failed to presist execution state. Error:80070057

 

-Failed to save execution state and environment to local hard disk

[anyweb]

can you attach the entire smsts.log please

[bdazle]

Niall, after spending another hour on the issue i managed to find a resolution to that error. For future reference for anyone with this issue:

 

Error: Failed to save the current environment block (Error:80070057)

 

Resolution: This is due to the wrong password being entered in the Network Access Account.

[anyweb]

thanks for the update, did you not verify it like I advised in Step 4 ?

[bdazle]

i did verify it and it came back with a success message, thats what had me puzzled when i went back and reevaluated my work

[LowBoost]

Is there a way to "pause" the Build & Capture task sequence so I can make customizations and then resume the Task Sequence?

 

I was "taught" to create a Task Sequence within MDT and I can perform cutomizations while in pause.

The problem I am facing is when I deploy that image via regular ConfigMan2012 Task Sequence is that after the deployment the computer is joined to the domain

as a different computer name.

 

I found this by verifying the NetSetup.log. The computer has a name of MININT-AA1234 but in AD it is joined as WIN-87KJH.

When I try to log-in with a domain account I get the "The security database on the server does not have a computer account for this workstation trust relation."

[steveakash]

Hi anyweb

 

i followed the steps but it doesnt work.

 

firstly I have dc01, dc01 (with AD and DHCP) and SCCM all in hyperv,, the servers is on different subnet than workstation,, i give the servers a static ip because the servers subnet without dhcp. so when I created hyperv virtual machine and run it,, it cant get an ip from dhcp..

 

how to connect dhcp with WDS in SCCM?

[anyweb]

the servers is on different subnet than workstation,

 

 

 

the client needs to be on the same subnet if you want PXE to work, is it ?

[bdazle]

yeap same subnet or you need to enable ip helpers

[steveakash]

 

the client needs to be on the same subnet if you want PXE to work, is it ?

 

what do you mean by client? is it the hyperv workstation or the user computer??

if you mean the hyperv which i have my servers its on the same subnet with SCCM,, but the computers are not on the same subnet,, btw i have configured ip helper