Hyper V client PC not Receiving Os deployment from SCCM 2012

[Oneone]

If you try to bood from media from the SCCM , when you get into the WinPE phase, do you get an ip-adress and can you ping the sccm site ect?

[manam.pervez1]

Hello Oneone,

i copied all the media/Os files/source files in my shared folder.

and i am not receiving IP from DHCP, and i can able to ping my SCCM site from anywhere else.

and i try to install OS manuly and i received IP from DHCP,

but when i try to Boot from network i am not receiving IP.

 

and all my net geting Ip from DHCP, that means my DHCP is working . and i dont have any firewall.

please advice.

Thank you

[Rocket Man]

Is your DHCP server also on the same server as your PXE/SCCM?

If so it could be that both PXE and DHCP are conflicting for the port!

[manam.pervez1]

No, DHCP, SCCM and DC, all of them are separated server.

and our client computer are using DHCP IP.

[Rocket Man]

Have you tried creating a new VM and new VHD to rule out the current problematic VM......I feel your error after DHCP request is related to a VHD error and nothing to do with SCCM!

 

Have you tried to connect a physical host to the network and try and PXE it?

[manam.pervez1]

Ok, right now i am using windows Server 2012 with Hyper-v, and its not working as you know.

and i also tried to create new VM with New VHD in under windows Server 2008 R2 with Hyper V, still having same issue.

some how my client not receiving Ip from DHCP or cant Boot From PXE, even i am not receiving any error as well.

please advice. Thank you

 

"Rocket man: please check you Personal Message inbox."

[manam.pervez1]

i just Found this error message after Reboot my SCCM .

"

PXE-E53 "No boot filename received"

"

 

please advice

[manam.pervez1]

Hello all,

finally i figured it out, from this web link

http://www.systemcentercentral.com/configmgr-pxe-boot-warning-matching-processor-architecture-boot-image-0-not-found/

 

now i received img, thank you for your time.

 

Thank you

[Rocket Man]

You have distributed both x86 and x64 boot.wims to DP and configured them to deploy from PXE server?

 

So what exatcly was the problem?

Both architecture boot.wim files where not distributed to the DP?

[manam.pervez1]

Yes Both Distributed , i always selected Boot Image x64. but last time i select x86 and "put checked mark" on Deploy this boot image the PXE Service Point. then i tried again and it works .

Thank you